CONTACT US      email    |   07 3823 1922 

Process Control

Our range of Process Control Products include: Flow, Level, Temperature Transmitters and Switches available in IECEx Certified and EEx devices to service the Petro-Chemical market. 

Transtech Loop Powered Signal Conditioners - LPSC Series

LPSC Loop Transmitter by TransTechThe LPSC series of transmitters by Transtech are powered by the 4-20mA loop and will accept all types of inputs while providing a varying analogue output between 4 and 20ma.

The LPSC series will accommodate inputs such as AC voltage, AC Current from CT, millivolts dc, Volts dc, milliamps dc, RTD, T/C and a SW (slide wire) inputs.

Typical models

LPSC-VC / LPSC-TC / LPSC-RTD

DOWNLOAD PDF    for more information on the LPSC Series Transmitter   

 

 

Transtech Loop Repeater – LRS

TransTech LRS 1 Channel Loop RepeaterThe LRS from Transtech is a fully floating 4-20mA signal isolator that provides up to 2500Vrms isolation between the input loop and the output loop. It can be used as a noise filter or reducer of common mode noice in some 4-20mA current Loops.

The LRS is manually adjustable to suit the individual loop loading, the adjustments being done from the top of the module via multi-turn potentiometers.

 

DOWNLOAD PDF    for more information on the LRS Transmitter    

 

Transtech 2 Channel Loop Repeater  – LRD 

LRD 2 channel Loop Repeater by TransTechThe LRD from Transtech is a fully floating 2 channel  4-20mA signal isolator that will provide up to 2500Vrms isolation between the input loop and the output loop. It can be used as a noise filter or reducer of common mode noice in some 4-20mA current Loops.

The LRD can be manually adjusted to suit the individual loop loading, the adjustments being done from the top of the module via multi-turn potentiometers.

 

DOWNLOAD PDF    for more information on the LRD 2 Channel Transmitter    

 

 

Transtech 24v Powered Loop Repeater  LRD-24V

LRD 24v Powered Loop Repeater by TransTechThe Transtech LRD-24V is a “Universal” powered, five port isolated, loop repeater that offers up to 1500V isolation between ports. The LRD-24V output currents are independent of the loop resistance up to the 1200 ohm limit and can be used as a noice filter or reducer for common noises found in some current loops.

 

DOWNLOAD PDF    for more information on the LRD-24v Transmitter    

 

 

 

 

Transtech Powered Signal Conditioners  TSC series

TransTech TSC Series Powered Signal ConditionersTranstech's TSC Mains Power Transmitter is a signal conditioner series that accepts a range of inputs such as mA dc, mV dc, DC Volts/Current, RTD, TC and Slide wire and provides a proportional standard instrument output in mA dc or Volts dc.

The TSC-XXX series are mains powered devices that offer a true 3 port galvanic isolation between Input - Output power supply and provides a transmitted output that gives a true zero output or any standard instrument signal in a mA dc, mV dc or Volts dc. 

  

 

 

 

 

Transtech Powered Signal Conditioners  TSCT series

TransTech TSCT Series Powered Signal ConditionersThe Transtech TSCT Mains Power Transmitter is a signal conditioner series that accepts a range of inputs such as mA dc, mV dc, DC Volts/Current, RTD, TC and Slide wire, it also provides a proportional standard instrument output in mA dc or Volts dc. In addition the TSCT-XXX offers a single changeover relay output for a high or low alarm. 

 

 

 

 

 

 

 

Transtech Powered Signal Conditioners  PTD-BRK/FF

TransTech PTD-BRK/FF Conveyor ControllersThe Transtech PTD-BRK/FF is a fully isolated dual trip amplifier/alarm module that accepts an AC/DC current input from 0 Amp up to 2 Amps from up to a 415V supply line. It is a stand alone alarm unit that operates as a window comparator where relay de-energises if the signal goes outside either the Lo or Hi settings.

 

 

 

 

 

 

 

Transtech Powered Signal Conditioners  PTD-BRK/FS

TransTech PTD-BRK/FS Conveyor ControllersTranstech's PTD-BRK/FS is a fully isolated dual trip amplifier/alarm module that accepts an AC or DC current input from 0 Amp up to 2 Amps from up to a 415V supply line, providing a trip relay output which operates between the fixed “Base” and “Maximum” current setting.

 

 

 

 

 

 

Transtech Conveyor Controller  PAM-01/B

TransTech PAM-01/B Conveyor ControllersThe Transtech PAM-01/B Pre-start Conveyor Alarm Monitor has an increased output capacity and is available with the optional delay off. When installed into the circuit of the PSA sounder the PAM-01/B will monitor the load current and supply voltage to ensure that they are within the normal operating parameters of the device.

 

 

 

 

 

 

 FEMA Panel Meters/Displays

FEMA Meters and Displays from TransTech FEMA designs digital panel meters based on each particular signals needs on the industrial sector. Reliable instruments, with clear and sharp reading, variety of sizes, digits, colors, signals and options. The ‘general industry applications’ series has the instrument you need for your specific application, and FEMA is the reliable partner for your company.

FEMA's OEM series digital panel meters have been designed to achieve a competitive price while acquiring a wide range of different signals in a single configurable instrument. Modularity, price and specifications makes OEM series a range of instruments highly competitive.

Within the FEMA ‘special series’ section are several examples of developments for specific industrial needs, High levels of quality and performance, each instrument fulfills specific needs : ‘Full equip’ meter, bar meters, LCD display and parallel BCD code repeaters are only 3 examples of our range of special instruments.

Signal converters with galvanic isolation, for a wide range of electrical signals of common use in industry. From simple process isolators without configuration needs, up to more complex units for all type of signals : temperatures, process, voltages AC and DC, currents AC and DC, frequencies, resistances, etc...