Flomec Medium Chemical Flow MeterFor precise volumetric flow measurement of clean liquids

The Flomec® Medium Capacity Chemical Flowmeters provide precise volumetric flow measurement of a broad range of clean water based products and aggressive chemicals and is also suitable for most fuels, fuel oils and lubricating liquids.

Applications include batching, dosing or packaging of various corrosive chemicals or as a more economical alternative to a complete 316 stainless steel meter for liquids such as Diesel Exhaust Fluid (AdBlue). 

 

 

 

 

 Features

  • High accuracy & repeatability, direct reading flowmeter
  • No requirement for flow conditioning ( straight pipe runs )
  • Measures high & low viscosity liquids
  • Quadrature pulse output option & bi-directional flow
  • Integral 4-20mA output option
  • Optional NMI Pattern Approval ( Australia only )

Models & Specifications
Meter Selection
Options
Downloads

Flomec Flow Products Orbital Piston Models & Specifications

OM080
Nominal Pipe Size
25mm (1")
*Flow range - GPM
 Flow range - LPM
2.6 - 40
10 - 150
**Accuracy@3cp + 0.5% of reading (accuracy is + 0.2% of reading with optional RT12 with non-linearit correction)
Repeatability typically + 0.03% of reding
Temperature range -20°c ~ +80°c, refer to factory for lower temperature
Maximum Pressure PSI (bar) Threaded Meters
PPS Meters 5 (70)

 

Electrical - for pulse meters (see also option outputs) 

Outut pulse resolution pulses / litre
Reed switch 27 (102)
Hall effect 107 (405)
QP - Quadrature Hall Option 54 (204)
Reed switch output ** 30Vdc x 200mA max. [maximum thermal shock 10°c/minute]  
Hall effect output (NPN) 3 wire open collector, 5~24Vdc, 20mA max.
Optional outputs 4-20mA, scaled pulse, quadrature pulse, flow alarms or two stage batch control

 

Physical

Protection class IP66/67 (NEMA4X)
Overall dimensions Download Specification Sheet
Recommended filtration 100 mesh (150 microns)

 

* Maximum flow is to be reduced as viscosity increases, see flow de-rating guide. Max. recommended pressure drop is 100Kpa. (15psi)

** Accuracy + 1% of reading iwth M - Series mechanical regsiters and accuracy + 0/5% of reading with V series mechanical register


Meter Selection

Selecting the right meter for your application. Meters are selected based on flow range, pressure, temperature, material compatibility and functionality.

PPS meters are used for non-aromatic/non-halogenated chemicals, water based liquids, Diesel Exhaust Fluid and petroleum products including oils and grease, fuels and fuel oils.

PPS meters with standard ceramic rotor pins are suitable for applications where stainless steel is not suited or permitted.

FLOMEC®  meter options include integral LCD totalisers, flow rate totalisers & batch controllers. These instruments provide monitoring & control outputs including 4~20mA, scaled pulse, alarms & batch control and are also available with robust mechanical registers:

  • BT LCD 5 digit reset, 8 digit cumulative totaliser.
  • RT12 LCD 6 digit reset, cumulative totaliser & flow rate. Analogue and Pulse Outputs
  • RT40 LCD 6 digit reset, cumulative totaliser & flow rate. Backlit Display
  • EB LCD 6 digit 2 stage batcher & cumulative totaliser.
  • M / V*  = Mechanical registers ( see model numbering )

(Instruments also available for remote mounting and with I.S. approvals)

Flomec Chemical Flow Meter Document Downloads

coming soon

Flow Type: Liquid Flow Meters