Pro-T Turbine Flowmeter from Vortek Instruments

TurboPro Model Pro-TTM Insertion Turbine Flowmeter

The Model Pro-T™ multivariable flowmeters from VorTek Instruments utilises three primary sensing elements:

  1. a turbine sensor
  2. an RTD temperature sensor
  3. a solid-state pressure transducer––to measure the mass flow rate of gases, liquids and steam

Because the TurboPro™ is able to measure all process variables within a single device it provides exceptional accuracy, simplifies system design and reduces installation costs. They are easily installed with flanged or Male NPT process connections in any pipe size of two-inches and greater.

An optional retractor or "hot-tap" hardware simplifies maintenance operations. The TurboPro™ Model Pro-T™ provides excellent range-ability and can measure very low flow rates with negligible permanent pressure drop. Additionally rotors are interchangeable, making this meter a good choice for installations with step changes in seasonal flow rates.

To simplify installation and commissioning, all measured variables and programming menus are available on the instrument’s easy to use display and control pad.

The product line is available with a wide range of options and meter configurations to meet your specific application requirements.

Features & Benefits
Download

  • Volumetric or mass flow monitoring of most liquids, gases, and steam
  • Multivariable meter delivers mass flow, temperature, pressure, and density readings from a single installed device and reduces initial costs, installation cost and cost of ownership over the lifetime of the instrument
  • Compensated mass flow reading of liquids, gases, and steam
  • Easy to install and commission - Hot tappable, process shut down not required for installation
  • High accuracy with rangeability up to 17:1
  • Handles temperatures from -267°c to 454°c
  • Handles pressures up to 1500 psig
  • Insertion style mounting permits installation in any pipe 2 inches and greater
  • Field configurable ranges, outputs and displays
  • Remote electronics option available for use in harsh environments or locations with limited access
  • 4-20mA loop-powered Mass Meter design saves on energy costs
  • HART protocol communications (standard)
  • Modbus communications available
  • FM, FMC, ATEX, IECEx Approvals pending


For more Specifications and Information Download the DATA sheet