Other

SeaMetrics SEB Low Flow Water Meter with High Output Pulse rate

SeaMetrics

The SeaMetrics SEB Low Flow Water Meter with High Output Pulse rate is used in industrial control operations.

FEATURES

  • Single-jet meter
  • Compact brass body
  • Union couplings
  • Easy installation and maintenance
  • Interfaces with many controls and displays

APPLICATIONS

  • Industrial control operations
  • Bakeries where chilled water and high humidity are  present (Potted Sensor)
  • Low flow situations
  • Clean water

The SEB is a plated brass low flow meter suited for clean water. It is available in 1/2” and 3/4” thread, with union-type meter couplings for easy installation and service. This meter is ideal for flow rates between 0.2 and 18 GPM. The SEB has only one moving part, the propeller.

A 5-30 Vdc current sinking pulse output makes the SEB ideal for many industrial control applications. This signal interfaces easily with programmable logic controllers and computer input boards. SEB meters can also be used in conjunction with the Seametrics FT420 flow computer for reading flow rate and total flow, or AO55 for 4-20 mA output. For metering pump pacing applications, a standard PD10 pulse divider is recommended.

½” Meter 0.75-38LPM (145.3PPL) ¾ ” Meter 0.75-68LPM (87.3PPL)

Maximum Temperature: 85˚C  Maximum Pressure: 12Barg


SeaMetrics SES Stainless Steel Single-jet Meter

SeaMetrics

The SeaMetrics SES Stainless Steel Single-jet Meter provides accurate, wide range flow metering in an extremely rugged stainless steel package.

FEATURES

• Accurate at low flows

• Simple and durable

• Rugged body

• High tolerance for problem fluids

APPLICATIONS

• Low flow monitoring

• Chemical batching

• Proportional chemical injection

• Fertilizer injection

The SES single-jet meter provides accurate, wide range flow metering in an extremely rugged stainless steel package. Single-jet simplicity combined with high quality jewel bearings results in long life and relatively high tolerance for problem fluids. Typical applications are chemical batching, proportional chemical injection, fertilizer injection, proportioning of spray chemicals, and general flow rate monitoring.

The sensor in the SeaMetrics SES Stainless Steel Single-jet Meter is easily replaced from outside the meter, and is compatible with most of the Seametrics indicators and transmitters, as well as most controls and PLC’s that ac­cept DC inputs. The standard rotor is PVDF (Kynar) and the shaft is a special nickel-bonded tungsten carbide. The optional ceramic shaft increases resistance to some concentrated chemicals. The standard O-ring is Teflon-coated Viton, with EPDM and Kalrez optional for compatibility with a variety of chemicals.