VorTek Instruments

VorTek Instruments manufactures precision multivariable flowmeters for the measurement of liquid, gas, and steam in commercial, industrial and municipal applications for the water and waste water, chemical & petrochemical, oil & gas, power, pharmaceutical, paper and food & beverage industries. Flow Meters for the Measurement of Liquid, Gas, Steam and Energy. Mass Flow Meters. Vortex Flow Meters. Insertion and Inline. Vortex, Turbine and Ultrasonic.

Model Pro-T™ Insertion Turbine Mass Flow Meter

Turbine Mass Flow

VorTek Instruments’ Model Pro-T™ multivariable flowmeters utilize three primary sensing elements–a turbine sensor, an RTD temperature sensor, and a solid-state pressure transducer––to measure the mass flow rate of gases, liquids and steam. Because the TurboPro™ is able to measure all process variables within a single device it provides exceptional accuracy, simplifies system design and reduces installation costs. They are easily installed with flanged or Male NPT process connections in any pipe size of two-inches and greater.

Optional retractor or “hot-tap” hardware simplifies maintenance operations. TurboPro™ Model Pro-T™ provides excellent rangeability and can measure very low flow rates with negligible permanent pressure drop. Additionally rotors are interchangeable, making this meter a good choice for installations with step changes in seasonal flow rates.

To simplify installation and commissioning, all measured variables and programming menus are available on the instrument’s easy to use display and control pad.  The product line is available with a wide range of options and meter configurations to meet your specific application requirements.


Pro-V Model M23 Insertion Mass Flow Meter

Vortex Mass Flow

Provides a direct reading of FIVE process parameters at the same time. Low maintenance, easy installation, and great configuration flexibility. Product mass flow measurement accuracy is ± 1.0% of rate for liquids and 1.5% of rate for gases and steam over a 30:1 range. Energy  versions.

Pro-V Advantage:
• Volumetric or mass flow monitoring of most liquids,
gases, and steam
• Multivariable meter delivers mass flow, temperature,
pressure, and density readings from a single installed
device and reduces initial cost, installation cost and
cost-of ownership over the lifetime of the instrument
• Compensated mass flow reading of liquids,
gases, and steam
• Energy Monitoring–ability to compute and output
energy use
• Easy to install and commission–Hot tappable,
process shut down not required for installation
• Reliable–no moving parts, no fluid to sensor contact
• High accuracy with rangeability up to 100:1
• Temperature up to 750°F
• Pressure up to 1500 psig
• Insertion style mounting permits installation in
any pipe 2″ and greater
• Field configurable ranges, outputs and displays
• Remote electronics option available for use in harsh
environments or locations with limited access
• 4-20mA loop–powered Mass Meter design saves
on energy costs
• HART protocol communications – Standard
• Modbus communications available
• FM, FMC, ATEX, IECEx Approved


Pro-V Model M22

Vortex Mass Flow

The Pro-V Model M22 provides a direct reading of FIVE process parameters at the same time.

Low maintenance, easy installation, and great configuration flexibility. Product mass flow measurement accuracy is ± 1.0% of rate for liquids and 1.5% of rate for gases and steam over a 30:1 range.

Energy and Cryogenic versions.